ELTECH OZONE manufactures different types of Ozone Generators from 1 Gm/hr to 2 kg/hr. It is an Independent and worldwide active company for Research, Development, Production and Sale of High graded Ozone Generators and Ozone Systems for virtually each of ozonator applications like Packaged Drinking Water, Swimming Pool, Waste Water treatment, effluent treatment, laundry, Aquaculture, Air Sterilization and etc.
Based on Lambert Bill's law, the analyzer of UVOZ-1200 by measuring the change of the intensity of the light signal before and after the UV absorption to calculate the current ozone concentration.
The equipment adopts the advanced dual UV light source system with the intelligent management system of the lamp tube and separated photocell technology enables the analyzer has the characteristics of no leakage, anti high pressure, anti large-flow sampling gas impact.
The ozone analyzer has a touch screen operation interface, which shows the real-time ozone concentration. And the touch screen is also with the pressure & temperature compensation display. For the high concentration (g/Nm3) range, it has the function of flow input, which can display the output of the ozone generator in real time.
The core component adopts long-life uv light system with the high light transmittance quartz to prevent zero drifting from affecting the detection accuracy. And no need to close ozone inputing at zeroing to ensure the equipment can run continuously 24 hours.
Application areas: ozone generator manufacturers, municipal water industry, industrial sewage industry, fine chemical industry food and drinking water industry, space disinfection industry, swimming pool disinfection industry, etc.
Model | UVOZ-1200 |
Detection Range | 0-300g/Nm3 |
Optional Range | 0-200g/Nm3,0-100g/Nm3, 0-50g/Nm3 |
Light Source Life | about 30000 hours |
Sampling Method | active pressure sampling,pumping sampling(optional) |
Display interfac | 4.3 inch touch screen operation interface |
Content Interface | ozone concentration, temperature, pressure |
Auxiliary Function | temperature compensation and pressure compensation |
Display Unit | g/Nm3 |
Display Resolution | 0.01 g/m3 |
Gas Flow | 0.5L ± 0.2L/min |
Input Pressure | < 0.1MPa |
Concentration Error | max 0.5% |
Line Deviation | max 0.2% |
Zero Drifting | < ± 0.3%.FS(whole range) |
Response Time | signal 0.03s, display 0.3s |
Ambient Temperature | -20 ~ 50°C |
Pipeline Connection Mode | Quick wring (stainless steel) |
Sampling Caliber of Series Connection | Φ8(8mm*6mm)(optional) |
Sampling Caliber of Bypass Connection | Φ6(6mm*4mm) |
Communication Mode | RS-485(Need to be customized) |
Output Mode | 4-20mA(Need to be customized) |
Relay Signal | High alarm point relay signal, low alarm point relay signal. |
Power Supply | AC 110-220V |
Dimension | 160mm(height)×260mm(width)×300mm(depth) |
Free Warranty | 24 months (main engine); |
Concentration Error | max 0.5% |
*Note: standard configuration (built-in): flowmeter, ozone exhaust gas catalytic converter, air inputting filter. (Remark:1mg/L=1g/m3=467PPM) |
Based on Lambert Bill's law, the analyzer of UVOZ-3 by measuring the change of the intensity of the light signal before and after the UV absorption to calculate the current ozone concentration. The equipment adopts the advanced dual UV light source system with the intelligent management system of the lamp tube and separated photocell technology enables the analyzer has the characteristics of no leakage, anti high pressure, anti large-flow sampling gas impact. The ozone analyzer has a touch screen operation interface, which shows the real-time ozone concentration. And the touch screen is also with the pressure & temperature compensation display. For the high concentration (g/Nm3) range, it has the function of flow input, which can display the output of the ozone generator in real time.
Model : | UVOZ-3 |
Detection Range | 0-300g/Nm3 |
Optional Range | 0-200g/Nm3, 0-100 g/Nm3, 0-50g/Nm3, 0-1000ppm, 0-100ppm |
Light Source Life | about 700 hours |
Sampling Method | active pressure sampling,pumping sampling(optional) |
Display Interface | 4.3 inch touch screen operation interface |
Content Interface | ozone concentration, temperture, pressure |
Auxiliary Function | temperature compensation and pressure compensation |
Display Unit | g/Nm3,mg/NL,%WT, ppm, mg/Nm3(optional) |
Gas Flow | 0.5L ± 0.2L/min |
Input Pressure | less than 0.1 MPa |
Concentration Error | max 0.5% |
Line Deviation | max 0.2% |
Zero Drifting | less than ±0.3%. FS(whole range) |
Response Time | signal 0.03s, display 0.3s |
Ambient Temperature | -20~5°C |
Pipeline Connection Mode | quick wring (stainless steel) |
Sampling Caliber of Series Connection | Φ8(8mm*6mm)(optional) |
Sampling Caliber of Bypass Connection | Φ6(6mm*4mm) |
Communication Mode | RS-485 |
Output Mode | 4-20mA |
Relay Signal | high alarm point relay signal, low alarm point relay signal |
Power Supply | AC 110-220V |
Dimension | 160mm(height)X 260mm(width) X 300mm(depth) |
Free Warranty | 12 months (main engine) |
Note : standard configuration (built-in): flowmeter, ozone exhaust gas catalytic converter, air inputting filter. (Remark:1mg/L=1g/m3=467PPM) |